KOMATSUBARA
HOME
What's newn Company profile Product introduction Inquiry
TOP > Product introduction > For Textile processing > “Soft Nouveau” emery type
ÂíØiÀïÍî
*
For Rubber processing
- Rubber Continuous Curing Equipment “Beruf High Burning Type”
- “Beruf-Z” batch type curing equipment
- “Beruf” continuous curing equipment
*
For Textile processing
- “Sun Shrinker”shrinking machine
- “Sun Luster”resin roll calender
- “Soft Nouveau”emery type
- dyeing machine
*
Washing machine
- FV Washing machine
*
“Soft Nouveau” emery type
There is not much dout that finishing which adds value to cloths is regarded as important in comparison with it was.
Particularly, consumer's needs are deversifying recently, thereby special finishing such as giving softness to cloths, “Peach-Skin” tone, and Suede tone, gives consumer's feeling of satisfaction. KOMATSUBARA“SOFT NOUVEAU” is developed as feeling finish machine and surface finishing machine at these circumstances.
 

USES

1) The machine can be used for all kinds of cloths such as cotton cloth, woolen cloth, linen cloth, synthetic fiber/cotton blended cloth, etc.
2) The machine is available for the following finishes.
Soft finishing, Emery raising, Peach-Skin finishing, Suede finishing, Sanding and Buffing, etc.


CHARACTERISTICS


1) After the complete removal of various “Peculiarity” of cloths such as crease, fine wrinkle, sag, one-side sag, cloths are processed by emery rolls.
Manufacturers of existing machines have taken great interest only in raising accuracy of emery rolls and have lacked the conception to pass cloths which have been removed various “Peculiarity” through processing section.
2) The machine has veriegated use as finishing machine.
*The machine can be used as a stenter which stabilizes cloth width.
*The machine can be used separately as felt calender.
3) The machine can completely collect dust such as polish-dust produced at processing by emery rolls.
4) The machine can be easily operated by the control panel.


STEAMING DEVICE(STEAM BOX)
This device gives cloths moisture by steam, and puts the “Peculiarity” of cloths such as crease, fine wrinkle, sag, one-side sag in condition of being easily removed.
 
CLIP EXPANDER (SHORT STENTER)
By spreading cloths treated to be easily removed various “Peculiarity” at steaming device toward weft direction by stenter,
the device straights completely various “Peculiarity”


DRYING DEVICE(FELT CALENDER)
Cloths are in condition which various “Peculiarity” of cloths have been completely removed, but when left as they are, they return to their untreated conditions.
To keep cloths in condition which their “Peculiarity” are completely removed, cloths are set by Felt Calender.
You can get cloths in good feeling and soft finishing.
(You can also set cloths by Steam Cylinder instead of Felt Calender.)
 
EMERY RAISING MACHINE
Cloths in condition of non-“Peculiarity” are processed by emery rolls. Cloths are uniformly finished by this condition.


1) CLOTH ENTERING DEVICE
2) STEAMING DEVICE
3) 1.1-M CLIP EXPANDER
4-A) FELT CALENDER
4-B) STEAM CYLINDER
5) EMERY RAISING MACHINE
6) CLOTH DELIVERY DEVICE


*
KOMATSUBARA, LTD.
25, 3-Chome, Chikko, Wakayama City, Japan 640-8287
TEL : +81-73-431-1477 FAX : +81-73-431-1470
URL : http://www.komatsubara-iw.jp/en/
Please contact us.
TOP
Home | New product information | Company profile | Product introduction | Inquiry
Copyright © 2004 KOMATSUBARA, LTD. All Rights Reserved.