“Beruf” high temperature hot air type curing equipment

"NEW SERIES HTC TYPE"

• Higher line speed is designed so that larger production efficiency is possible.
• Since skin layer is formed by quick curing Work surface at high temperature immediately after extrusion, its outer diameter size is precisely stabilized.
• Even by inner curing is by micro wave, skin layer can help prevent uneven surface & outer diameter error leading to less rejects.
• "Low energy cost & no pollution" (utmost features of "Beruf") is made full use. By high-temperature processing, more exhaust gas than ever is combusted making it colorless and odorless perfectly leading to environmental protection.
• By allover use of stainless steel inner furnace material, its cleanness is maintained helping prevent occurrence of fire during curing process.

• Optimum for curing sponge type rubber. More effective processing available together with micro wave type curing by which dimensions of products are more stabilized.
• Optimum for curing solid rubber (for hose, tube, & etc.) for which strict size precision is required.
• When any efficiency increase is intended for your existing production line either for sponge rubber or solid rubber, your target will be attained by incorporating this HTC type equipment into the existing lines.

• Hot air blowoff method ;
  Our equipment is of the construction on which how hot air is transmitted to the Works evenly is taken into account as attained from our long-year experience for hot air blowoff from both upper & lower part of the passline with its hot air recycling system.
• Temperature in curing furnace ;
  MAX.400 deg.C
• Heat source ;
  Gas direct firing or light oil direct firing type
• Conveyance method ;
  Roller or Belt type conveyor use, Roller of insert metal use
• Furnace inner material ;
  Stainelss steel is used allover for the furnace inside to contact reaction gas generating during curing process by which cleanness therein is maintained and heat-proof effect is improved.
• Thermal insulation and heat retention properties ;
  Due to high temperature inside the furnace, insulation board is of special construction including particular air layer so that the outer surface of the furnace can maintain 50 deg.C or below.
• Effective length of heating ;
  5.2m (standard), Other length is also possible to design.
• Conveyor speed ;
  1.0-30m/min. (Standard)
  

"HTC-5R" (Standard Type) Type External Sketch

Demonstration Unit

• The unit for demonstration is located in our shop so that it is usable for testing.
• Since we, all staff, are striving to meet any of your needs relating to curing, your contact to us will be highly appreciated at all the times.